Simple Guide to Installing a New Shower Unit

Simple Guide to Installing a New Shower Unit

Blog Article

Call

Are you currently hunting for insight on How to Install a Direct-to-Stud Shower Enclosure?

An effective shower setup calls for cautious planning as well as a lot of work. For the most part, you will certainly require to do 3 sorts of tasks: framing walls, mounting the plumbing, and also ending up wall surfaces.

Prep work

First of all, you have to choose the kind of shower that you desire to install. It is important to ascertain whether the selected shower is capable of managing certain systems as well as can control a secure level of water with the central heating boiler. A lot of shower systems nowadays are created to be adaptable to various water stress (such as kept hot water and chilly keys).
It is likewise vital to think about the water pressure as well as the preparation of the piping and drain for the shower

Various Types of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower unit can be attached to the bathroom tap as per your demand, as well as the water temperature level can be readjusted through the faucets. Push-on mixers are cheap and also incredibly basic to mount. Nonetheless, although the tube connection is simple, it is easily dislodged. Additionally, it is inconvenient to readjust the temperature level.

Bath/Shower Mixer: The hose pipe as well as spray of this sort of shower are combined with a bath mixer faucet, and the temperature can be changed through the bath taps. It is a very cheap option and also no added plumbing is entailed. Nevertheless, the bath/shower mixers also suffer from bothersome temperature level control choices.

Handbook Mixer: The tube and also spray of a hands-on mixer shower unit are a part of the wall surface system as well as the cold and hot water supplies are attached to a single shutoff The temperature level and also stress of the water are regulated via either one or a selection of knobs (in a lot more costly showers). Although temperature control is a lot easier in manual mixer kinds, they are more expensive than the formerly stated mixers. They also require extra plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall system and also the cold and hot water supplies are connected to a solitary valve below too. It is full with an integrated stabiliser to self-adjust the water temperature and to avoid it from becoming also hot. One of the largest benefits of a thermostatic mixer shower type includes hassle-free temperature control. However, it is one of the most expensive of the different mixer options.

Power Shower: A power shower is a solitary device containing a powerful electrical pump that can changing both the water stress and also temperature level. This type of shower can be fitted if there is water from a cold water tank and also a warm water cyndrical tube. A power shower makes the modification of both pressure as well as temperature very easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix central heating boiler under mains stress.

Electric Shower: An electrical shower is plumbed into a mains cold water supply as well as it warms the water electrically. It is essential to note that for this shower kind to be mounted, the mains pressure needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature level and stress to be adjusted via a knob. Versions with temperature stabilisers are much better as they stay unaffected by other taps in other places being used within the house. A major disadvantage of electrical showers is that the control handle just enables the alternative of high temperatures at less pressure, or lower temperature levels at a greater pressure. This is bothersome in the winter when the spray is commonly weak and also the keys water is cooler. Nevertheless, this problem is dealt with in some designs which are available with a winter/summer setup.

Technique

Relying on the sort of shower you want to mount, the shower head have to either be suited order to avoid its contact with the water in the bath below or the base tray, or it has to have a check valve.
Prior to starting, it is advisable to mark the settings of the shower head and also control, and also to prepare the pipe-work included. Furthermore, the drain system to remove the drainage will require to be prepared. Both positions of the wire route as well as the shower switch will certainly likewise need to be taken into consideration if an immediate or electrical shower system is being mounted.
Utilize the instruction overview provided with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is necessary to remove the supply of water. In order to safeguard the pipes, they should be offered a water-proof covering as well as additionally fitted with separating shutoffs. The pipelines can then be buried right into the wall as well as plastered over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Connect the main shower control to the pipelines that will be supplying the water (This may call for a female screw thread adapter).
Reconnect the supply of water and examination the pipes for any kind of leaks, as some might need tightening.
If you are installing an electric shower, remember to switch off the electrical power supply prior to making any type of electric connections. Once these connections have been made (there need to be guidance within the user's manual), the power supply can be switched back on.

Changing Water Pressure to Match Your Shower

The cold water tank can be lifted to a higher elevation (in some cases just 150mm (6inches)) by installation a solid wooden assistance underneath it - possibly made up of struts as well as blockboards. If you pick this option, the primary as well as circulation pipes will also need to be raised to meet the brand-new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be linked right into the power supply in order to operate.

Piping and Drain

It is best to make use of 15mm diameter supply pipelines, and make the go to the shower as short as well as straight as possible so regarding maintain maximum pressure and minimise warmth loss. Furthermore, by minimising using arm joints for pipeline corners, you can lower the resistance in the circulation of the water supply. You can achieve this by bending the pipelines instead.

The Majority Of Common Errors

Violating or overlooking neighborhood code limitations.

Making use of pipelines that are too tiny.

Attaching copper to galvanized without utilizing a brass or dielectric fitting between the two.

Not utilizing tape or pipeline substance at threaded joints.

Not leveling your fixtures when mounting them.

Not installing an air gap filling up for components.

Cutting supply stub outs too brief to mount the shutoff valves onto after the finished wall is in area.

Not correctly straightening tubing right into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leakage.).

When turning the water back on in your house, constantly run the outdoors tube shutoff or purge your commodes to hemorrhage dust as well as air from the lines. This debris can trigger troubles in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a passionate reader on How to Build a Shower Enclosure for Your DIY Bathroom, I imagined sharing that excerpt was essential. Appreciated our article? Please share it. Help others locate it. I value reading our article about How to Install a One-Piece Shower Unit.

Schedule Services

Report this page